(UL Listed)12V Power Supply 200 Watts Outdoor IP67 Waterproof Transformer AC/DC 12 Volts Constant Voltage 200W LED Driver Low Voltage 12VDC 16.7Amps for LED Strip Light, Landscape Light

June 14, 2019 - Comment
Add to Cart $53.99Amazon.com Price
(as of 00:45 GMT+0100 - Details)

Warranty
We provides 30 days money back, and 36 months quality warranty for the free replacement

Delivery Item:

1x 12V 200W Power Supply UL Listed

LED DRIVER SPEC:

==INPUT==
> Vin: 100-240VAC, 50/60Hz
> Efficiency: 88%

==OUTPUT==
> Vout: 12VDC, 200W
> Iout: 16.7 Amp
> Constant Voltage

==ENVIRONMENTAL==
Operating Temperature: -25 to +45Deg.C,
Water-Proof for wet or dry location
HUMIDITY: 95%
Max Case Temp: 60Deg.C

==MECHANICAL==
Product Size: 9.7×3.75×1.97inch
Net Weight: 4.18Ib.

About us:
Thank You Order the Power Supply from Enersystec Electric Co.,Ltd, with over than 10 years product design, quality control and manufacturing experience, Enjoy the Great Products and Excellent Customer Service

Product Features

  • CONSTANT VOLTAGE OUTPUT- with 12VDC 16.7Amps output, 200W Max, high accuracy, low ripple noise power supply.
  • WIDE AC INPUT- Working voltage range 100-240V AC, with good surge protection to avoid damage by high surge voltage in the rain day.
  • SAFE DESIGN- UL Certified 12V LED driver, with short circuit protection OCP, over temperature protection OTP, Over Voltage Protection OVP, safe for your equipment, no fire hazard.
  • POTTING FOR WATERPOOF- the unit was fully potted for waterproof, IP66 rated, this transformer is suitable to use for outdoor or indoor project.
  • WARRANTY- 3 years quality warranty, 7×24 quick response, easy and free.

Comments

Anonymous says:

Much better than the 60 watts 5A power supply that comes with the RGB strip The one I received is working perfectly. It’s powering a 40 feet RGB strip and a 16 feet 600 single color led strip and a z wave controller. I have been using it for almost a month, at least 8 hours a day. The whole setup is pulling just over 90 watts off the power supply. I don’t see any blink regardless what brightness level I’m setting it. The power supply does get warm but not hot. I’m sure I can put more load on it when I need to expand my setup.

Anonymous says:

This is the device you need if you are using RGB Strip lights in your landscape design This is the third 12 VAC to 12 VDC converter that I purchased on Amazon. This is the one you need if you are using RGB strip lights in your landscape lighting design. Solidly constructed, well designed, no heat issues and no flicker or strobbing.

Anonymous says:

Excellent built quality Nice product, very well made.

Write a comment

*