1. TO AVOID DANGER, TURN OFF ALL POWER and test the power is off before wiring!
2. Wiring: The two input wires(Red & Blue, Red wire is the Fire wire) connect to alternating current, the two output wires(Brown & Blue, Brown wire is the output Fire Wire) connect to lights or other devices.
Read user manual operation before you install receiver. Thank you. .
Install switch with adhesive rubber (included)
How Wsdcam Switch Works
Wireless switch kit is consist of switch and receiver.
1. Switch: Self-powered RF transmitter, Place anywhere in your house
2. Receiver: Accept transmitter (switch) signal to switch power on/off to light. (linked between power and lamp)
3. Click switch(transmitter) sends wireless signal to receiver to accomplish power on/off control
A switch can pair with multiple receivers to accomplish one switch simultaneously control several lamps
A receiver can pair with 8 switches to accomplish three way switch system, multi-way switch system
– Works with any lights like halogen/incandescent/CFL/fluorescent/LED light.
– 433mhz, transmission distance 0~70 meters/229 ft Indoors and Approximately 600 Meters/1968 ft in outdoors open space
– Voltage AC80-150v, mixed load power 1000W, working Temperature -40 ~ +70℃.
– Encrypted connection, no signal interferences between switches.
– Switch with CR2032 button lithium battery, IP54 water resistance, 7-9 years lifetime.
– Switch button life 800 thousand times, standby power 0W, fireproof lever VO
– 400 thousand times for the receiver
– Less radiation than the smart phone and WIFI devices
– PC material- high stability and flexibility, flame-resistant and reliable
– Switch size: 86x86x11mm, receiver size: 39x23x22mm
1 x Receiver
1 x Switch
2 x adhesive rubbers
1 x Manual